C2G LANtest - network testing device
Mfg # 13138
CDW # 1203456
| UNSPSC 43222634
Know your gear
Test cable installations up to 200 meters (656 feet). The simplest and most affordable wire-mapping device for networking cables available on the market. Use it to read the actual wiring configuration for Cat5, coaxial and modular telephone cables by comparing one transmitting end to another receiving end. Easy verification for cabling faults including discontinuity, open wires, shorts, miswiring and crossed pairs is quickly detected with the LANtest's unique LED display. Can also test the grounding. Perform all the above tests on installed cables with the included remote terminator.
Tests the correct pin configuration of 10Base-T, 10Base-2, thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable, etc. With the remote kit, LANtest can remotely test cable up to 1000 feet away either on the wall plate or the patch panel. Includes an auto or manual scan for pinout indicators, and a power switch for saving battery power.
Tests the correct pin configuration of 10Base-T, 10Base-2, thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable, etc. With the remote kit, LANtest can remotely test cable up to 1000 feet away either on the wall plate or the patch panel. Includes an auto or manual scan for pinout indicators, and a power switch for saving battery power.
Enhance your purchase
C2G LANtest - network testing device is rated4.00 out of5 by2.
Rated 5 out of 5 byIT guru from Great Test KitThis test kit helped us to quickly resolve a CAT5 cable problem. It is easy to use, although the instructions leave a lot to be desired.
Date published: 2011-07-20T00:00:00-04:00
Rated 5 out of 5 byGW from Great productproduct seems sturdy. works as advertised
Date published: 2010-06-11T00:00:00-04:00
Rated 5 out of 5 byrazcal from Easiest Lan tester to useMuch better tester than I have purchased. Platform irrelevant as I use both Linux and pc. Almost as good as if you had a magic wand. Thanks.
Date published: 2015-10-19T00:00:00-04:00
Rated 5 out of 5 bydanh from a nice test kitThis tester saved me a lot of time while wiring my home. It consistently reported switched wires (argh) and short wires (ugh) before I committed to the line. I call it well worth the money.
Date published: 2010-01-26T00:00:00-05:00
Rated 5 out of 5 byEd from Best bang for the buckVery practical for the everyday wiring. With the 8 LED pair display is evident at a glance if there are no connectivity, shorts, reversed pairs or any other pinout issue.
Date published: 2010-09-28T00:00:00-04:00
Rated 5 out of 5 byRyan the ISP from Does not return stats to main unit.This tester, when using the remote unit, does not tell you on the main unit if there is continuity to the remote unit. You have to physically see the remote unit to verify continuity.
Date published: 2013-09-25T00:00:00-04:00
Rated 5 out of 5 byRick from Easy to UseGreat product and easy to use and understand.
Date published: 2010-06-11T00:00:00-04:00
Rated 5 out of 5 byGMAN from Works WellThe tester is easy to use but you can not use on live wires. Lan wire connections that run throughout a building need to have a tester that can handle live testing. Great for 5 or less wires in a system.
Date published: 2012-06-27T00:00:00-04:00