Tripp Lite 6in USB 3.0 SuperSpeed to SATA III Adapter w/UASP/2.5-3.5" Black
$37.90
$18.99
Mfg # U338-06N-SATA-B
CDW # 5956727
| UNSPSC 26121600
Quick tech specs
- USB 3.0 SuperSpeed to SATA III Adapter Cable with UASP 2.5in to 3.5in SATA Hard Drives
- Supports USB 3.0 data transfer rates up to 5Gbps
- compatible with SATA HDDs and SDDs up to 4 TB
- Compatible with all USB-enabled operating systems
- usb 3.0 super speed to sata hard drive/ usb 3.0 superspeed to SATA III/ USB to SATA/ IDE to USB
- Works up to 70% faster when connected to UASP host controller
- Plug and play- no external power supply required
- 1 Year Tripp Lite Warranty
Know your gear
The U338-06N-SATA-B USB 3.0 SuperSpeed to SATA III Adapter Cable connects a 2.5-inch SATA hard disk drive (HDD) or solid state drive (SSD) to an available USB port on your laptop or computer. This lets you back up important data, retrieve data from an old hard drive, or store information on an external drive that you can take with you to another computer.
This adapter cable supports USB 3.0 data transfer rates up to 5 Gbps. Its UASP (USB Attached SCSI Protocol) feature reduces latency and allows the cable to perform up to 70% faster when connected to a UASP-enabled host controller.
Perfect for storing and sharing large files, such as music and video files, the U338-06N-SATA-B is compatible with SATA drives up to 4 TB. Just insert the drive into the 22-pin SATA connector, and attach the built-in USB 3.0 cable to your computer.
The U338-06N-SATA-B accepts SATA III (6 Gbps), SATA II (3 Gbps) and SATA I (1.5 Gbps) drives, as well as USB 2.0 (480 Mbps) and USB 1.1 (12 Mbps) transfer speeds. It supports LBA-48 bit (Logical Block Addressing) and USB Mass Storage Class Bulk-Only Transport. No software, drivers or external power supply is required. Compatible with all USB-enabled operating systems.
This adapter cable supports USB 3.0 data transfer rates up to 5 Gbps. Its UASP (USB Attached SCSI Protocol) feature reduces latency and allows the cable to perform up to 70% faster when connected to a UASP-enabled host controller.
Perfect for storing and sharing large files, such as music and video files, the U338-06N-SATA-B is compatible with SATA drives up to 4 TB. Just insert the drive into the 22-pin SATA connector, and attach the built-in USB 3.0 cable to your computer.
The U338-06N-SATA-B accepts SATA III (6 Gbps), SATA II (3 Gbps) and SATA I (1.5 Gbps) drives, as well as USB 2.0 (480 Mbps) and USB 1.1 (12 Mbps) transfer speeds. It supports LBA-48 bit (Logical Block Addressing) and USB Mass Storage Class Bulk-Only Transport. No software, drivers or external power supply is required. Compatible with all USB-enabled operating systems.
Add to Compare
Enhance your purchase
Tripp Lite 6in USB 3.0 SuperSpeed to SATA III Adapter w/UASP/2.5-3.5" Black is rated4.67 out of5 by6.
Rated 5 out of 5 byT from Just What I NeededJust needed an easy and affordable way to clone my old HDD to a new SSD. The cable did the trick. Would definitely recommend!!
Date published: 2020-03-31T00:00:00-04:00
Rated 5 out of 5 bySlatjam from Just what I neededWanted to clone my hard drive to a larger SSD without losing data. This adapter will allow me to do that.
Date published: 2020-02-03T00:00:00-05:00
Rated 5 out of 5 byChrisP from ExcellentExcellent product to get the job done. Meet all expectations.
Date published: 2018-11-19T00:00:00-05:00
Rated 5 out of 5 byjay from like white to blue light verticalWhite+blue light. vertical attach to laptop a +
Date published: 2019-11-07T00:00:00-05:00
Rated 5 out of 5 byCommodore1t from Performs as advertisedI used this cable to clean off extra HDD's I had on my building desk. It works great, but the cable is very short. I have a portable dock, however, so it wasn't a problem for me. 10/10, would buy again (and probably will).
Date published: 2019-12-13T00:00:00-05:00
Rated 5 out of 5 bysy from Love itvery easy to use.
Date published: 2019-05-28T00:00:00-04:00