Quick tech specs
- Transmit a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable
- Supports DVI-D Single-Link video resolutions up to 1920x1080 @ 60Hz
- Plug and play-no external power or software/drivers required
- For use with B140-002 or B140-004 transmitter units
- Compatible with all operating systems
- DVI over CAT5 extender/ DVI video extender/ DVI to Cat5 extender/ DVI over Cat6 extender/ DVI to Cat6 extender/ display extender/ digital signage/ video receiver
Know your gear
The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 30.5 m (100-ft.) away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-1P0 is compatible with all operating systems, and is plug and play, with no external power, software or drivers required.
Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0's built-in DVI connector to a display. Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 15 m (50-ft.) from the source, or a 1024 x 768 @ 60Hz signal up to 30.5 m (100-ft.).
Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0's built-in DVI connector to a display. Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 15 m (50-ft.) from the source, or a 1024 x 768 @ 60Hz signal up to 30.5 m (100-ft.).